Modélisateur de chromatogrammes Pro
EZ
GC
Modélisateur de chromatogrammes Pro
EZ
LC
Logiciel de transfert de méthodes
et calculateur de débit
EZ
GC
Logiciel de transfert de méthodes Pro
EZ
LC
Skip to Content
Suite de logiciels en ligne
EZ
GC et
EZ
LC
Mon compte
S'enregistrer
Se connecter
Vers le site Restek
Modélisateur de chromatogrammes Pro
EZ
GC
Modélisateur de chromatogrammes Pro
EZ
LC
Logiciel de transfert de méthodes
et calculateur de débit
EZ
GC
Logiciel de transfert de méthodes Pro
EZ
LC
Isopentane
CAS # 78-78-4
Rechercher un autre composé :
Commencez à écrire le nom du composé
en anglais
puis cliquez sur "Sélectionnez".
Structure et propriétés du composé
Masse moléculaire
72.1488
Formule
C
5
H
12
Point de fusion
-161--159 °C, 112-114 °K, -258--254 °F
Point d’ébullition
28-28 °C, 300.9-301.3 °K, 82-83 °F
Densité
616 mg mL
−1
Sources de données :
ChemSpider
et
Wikipedia
Spectre de masse GC
m/z
Sélectionnez et cliquez sur une zone pour zoomer, double-cliquez pour dézoomer.
Survolez les pics pour connaître les valeurs.
Synonymes
Butane, 2-methyl-; iso-Pentane; 1,1,2-Trimethylethane; 2-Methylbutane; iso-C5H12; Ethyldimethylmethane; Isoamylhydride; Exxsol isopentane; 1,1-dimethylpropane; methylbutane; Iso-Pentane * Isopentane; Exxsol isopentane S; NSC 119476
Restek vous suggère
Michigan/Missouri Residual Solvents Standard, 500-5000 µg/mL, 1,2,4-trimethylbenzene, 1 mL/ampul
New York Residual Solvents Standard, 500-5000 µg/mL, 1,2,4-trimethylbenzene, 1 mL/ampul
New York Residual Solvents Kit, 1,2,4-trimethylbenzene, 3 ampuls/kit
Michigan/Missouri Residual Solvents Kit, 1,2,4-trimethylbenzene, 3 ampuls/kit
Solution étalon de calibration D3710-95, ampoule de 1 ml
Chromatogrammes
New York Residual Solvents on Rxi-624Sil MS
Michigan/Missouri Residual Solvents on Rxi-624Sil MS
Separation of Hydrocarbons using Hydrogen Carrier Gas on the Rt-Alumina/MAPD
Separation of Neopentane from Other C4 Hydrocarbons on the Rt-Alumina/MAPD
PAMS on Rt-Alumina BOND/MAPD (by FID) and Rxi-624Sil MS (by MS) using Deans Switch
TO-15 (HJ759) + PAMS on Rt-Alumina BOND/MAPD (by FID) and Rxi-624Sil MS (by MS) using Deans Switch
Impurities in Commercial Cyclohexane on Rtx-DHA-100
Hydrocarbon Gases on Rt-Q-BOND
Refinery Gas on Rt-Q-BOND
Hydrocarbon Gases on Rt-Q-BOND
4-Hr Shipping Facility Air Sample with radiello 145
PiONA Calibration Standard on Rtx-DHA-100 by ASTM D6729-14
Refinery Gas on Rtx-DHA-100 (ASTM D2163)
Simulated Distillation of Gasoline on MXT-1 (ASTM D7096-16)
Refinery Gas on Rt-Alumina BOND/Na
2
SO
4
(ASTM D2163-14)
Isoparaffins on Rtx-DHA-100 (ASTM D6729-14)
Simulated Distillation of Gasoline on MXT-1 (ASTM D7096-16)
Alkylate Standard on Rtx-DHA 50 by Method D5134-13
Reformate Standard on Rtx-DHA 50 by Optimized ASTM D5134-13
Impurities in Methyl-
t
-Butyl Ether (MTBE) on Rtx-DHA-100 (ASTM D5441)
Impurities in Methyl-
t
-Butyl Ether (MTBE) on Rtx-DHA-150 (ASTM D5441)
Impurities in Methyl-
t
-Butyl Ether (MTBE) on Rtx-DHA-50 (ASTM D5441)
PAMS 57 Component Mix on Rtx-1 (105 m)
Reformate on Rtx-1
C1-C5 Hydrocarbons on Rt-Alumina BOND/MAPD
1,3-Butadiene on Rt-Alumina BOND/MAPD (Purity Analysis)
Crude 1,3-Butadiene on Rt-Alumina BOND/MAPD
Light Hydrocarbons on Rtx-DHA-150
Natural Gas (82 Methane) on Rtx-DHA-150
Refinery Gas Hydrocarbons on Rt-Alumina BOND/Na
2
SO
4
Mass APH on Rxi-1ms
Refinery Gas on Rt-Alumina BOND/KCl
Refinery Gas on Rt-QS-BOND
Propylene and C1-C5 Hydrocarbons on Rt-Alumina BOND/Na
2
SO
4
Refinery Gas Using OPN on Res-Sil C Packing
Refinery Gas Calibration Standard on Refinery Gas Packed Column Set
Sulfur Compounds and Hydrocarbons on Rt-XLSulfur
Refinery Gas on MXT-Alumina BOND/Na
2
SO
4
Natural Gas #2 on Rt-QS-BOND
Ozone Precursors on Rtx-1
Ethylene and C1-C5 Hydrocarbons by ASTM D6159-97 on Rt-Alumina BOND/KCl, Rtx-1
Refinery Gas on Rt-Alumina BOND (Na
2
SO
4
)